V-belt Dayco AX 37
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 37 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 37 and any equivalents.
The Dayco AX 37 is a cogged classical V-belt in the AX profile with a length of 990.6 mm. It is built for industrial drives where a raw-edged, cogged construction is specified. If you are replacing a belt, the most reliable approach is to match the profile and the length marked on the belt you are removing.
Start by reading the marking on the back of the old belt. The profile and length printed there are the two values to compare against this belt: AX and 990.6 mm. A belt that has stretched or worn may no longer measure exactly, so the marking is often the better reference than a tape measure.
Check the drive for the number of belts and replace them as a set where the drive uses more than one. Inspect the sheaves for wear, and confirm the belt sits correctly in the groove. The same size is also listed under Stark AX 37 and Optibelt AX 37.
To request a quote, send the part number Dayco AX 37, or send the marking from your old belt and a photo of the drive. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 990.6mm
Frequently asked questions
- How do I confirm the Dayco AX 37 is the right belt?
- Compare the profile and length marked on your old belt: AX and 990.6 mm. If the marking is unreadable, send a photo of the belt and the drive for confirmation.
- Can I replace just one belt on a multi-belt drive?
- Where a drive uses more than one belt, replace them as a set so the load is shared evenly. Mixing a new belt with worn belts can cause the new belt to carry more than its share.
- What information do you need to quote the Dayco AX 37?
- Send the part number Dayco AX 37, or the marking from the old belt, along with the quantity. A photo of the drive and the belt helps confirm the match.