V-belt Dayco AP49
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP49 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP49 and any equivalents.
The Dayco AP49 is a classical V-belt in the A profile, built for the standard industrial drives where this cross-section is common. It measures 1295.4 mm in length, with a 13 mm top width, 8 mm height and 40° angle. This page gives you the numbers to confirm a fit before you request a quote.
Classical A-profile belts turn up on fans, blowers, pumps, compressors and similar equipment where a single belt runs between two pulleys. Because the profile and length set the fit, check the old belt's marking first: an A-section belt that reads 1295.4 mm matches the AP49. The 13 mm top width and 8 mm height are the A-profile dimensions to compare against the pulley groove.
If the marking is worn off, measure the outside length of the old belt and confirm the cross-section across the top. The AP49 is a wrapped classical belt, not a narrow wedge or cogged design, so match the profile before ordering. Send the part number, the equipment make and model, and a photo of the drive or the old belt if you have one, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1295.4mm
Frequently asked questions
- How do I confirm the Dayco AP49 fits my drive?
- Check the old belt for an A profile and a 1295.4 mm length, then compare the 13 mm top width and 8 mm height against the pulley groove. If the marking is gone, measure the outside length and the top width of the old belt.
- What information should I send with my quote request?
- Send the part number AP49, the equipment make and model, and the old belt marking or a photo of the drive. That is enough for us to confirm the belt or suggest an equivalent.
- Is the AP49 a narrow wedge belt?
- No. It is a classical V-belt in the A profile, with a 13 mm top width, 8 mm height and 40° angle.