V-belt Dayco AP22
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP22 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP22 and any equivalents.
The Dayco AP22 is a classical wrapped V-belt in the A profile, with a 609.6 mm length. It is used on industrial drives that call for a classical V-belt rather than a narrow wedge or synchronous design. Confirm fit by matching the profile and length to your existing belt.
Classical wrapped V-belts like the AP22 are common on older or slower industrial drives, including line shaft, fan, pump and general machinery drives where the pulley groove is cut for a classical profile. The A profile is identified by its 13 mm top width, 8 mm height and 40 degree angle. The wrapped construction is typical of this belt type.
To confirm the AP22 fits, read the marking on the back of the old belt and compare the profile letter and length to the A profile and 609.6 mm length listed here. Also check the pulley groove width and the belt's cross section against the 13 mm top width and 8 mm height. If the old belt is worn or the marking is unreadable, measure the outside length and the top width before ordering.
When you request a quote, send the part number AP22 and the quantity. If you are replacing a set, include the number of belts on the drive. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 609.6mm
Frequently asked questions
- What does the A profile mean on the Dayco AP22?
- The A profile is a classical V-belt cross section. On this belt it has a 13 mm top width, an 8 mm height and a 40 degree angle. Match these dimensions to the pulley groove and the old belt.
- How do I confirm the 609.6 mm length is correct?
- Check the marking on the back of the old belt for the length, or measure the belt. The AP22 is listed at 609.6 mm. If the old belt is stretched or worn, use the original specification rather than the worn measurement.
- What should I send to request a quote for the Dayco AP22?
- Send the part number AP22, the quantity, and the number of belts on the drive if you are replacing a set. If you have the old belt marking or a photo, include that as well.