V-belt Dayco AP180

DAYCO AP180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP180 and any equivalents.

The Dayco AP180 is a classical V-belt with an A profile and a length of 4622.8 mm. Its 13 mm top width, 8 mm height and 40° angle identify the cross-section and fit for the drive it was built for. Use these dimensions to check the belt against your existing drive before you request a quote.

Profile and length are the first two things to confirm when replacing a classical V-belt. The AP180 carries an A profile, so the belt is 13 mm across the top and 8 mm high, with a 40° angle. The length is 4622.8 mm. If your drive was set up for an A-section belt, these figures tell you whether the AP180 matches the run.

The cleanest way to verify a replacement is to read the marking on the back of the old belt and compare it with the part number and dimensions here. If the old belt is worn, frayed or stretched, measure the drive and confirm the A profile and 4622.8 mm length before ordering. Send the part number, the profile and the length by WhatsApp or email, and the team can help confirm the right belt or suggest an equivalent.

On multi-belt drives, replace belts as a set so the load stays even across the grooves. Inspect the sheaves for wear, alignment and debris at the same time, since a worn groove can shorten the life of a new belt. The Dayco AP180 is a classical wrapped industrial belt for drives that take an A profile.