V-belt Dayco AP113
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP113 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP113 and any equivalents.
The Dayco AP113 is a classical wrapped V-belt with an A profile and a length of 2921 mm. It measures 13 mm across the top, 8 mm in height, and is built to a 40 degree angle. Classical wrapped belts like this one are commonly used on older and lightly loaded industrial drives where a simple, stable belt is preferred.
Because profile and length drive fit more than anything else, confirm both before ordering. The A profile sets the cross-section, and the 2921 mm length sets the run. If the belt on the drive is worn or the marking is gone, measure the outside length and compare it to 2921 mm, and check that the sheave groove accepts a 13 mm top width at a 40 degree angle.
The AP113 suits drives that turn at moderate speed and carry steady loads rather than shock or high-torque duty. Inspect the sheaves for wear, alignment and debris before installing a replacement, and check belt tension after the first run-in period. A wrapped classical belt can hide internal damage, so replace it rather than reusing one that has been run loose or overheated.
To request a quote, send the part number AP113, the quantity, and the drive or equipment it goes on. If the existing belt carries a different number, send that number and the belt's measurements so the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2921mm
Frequently asked questions
- How do I confirm the Dayco AP113 fits my drive?
- Check the profile and the length. The AP113 is an A profile belt, 13 mm top width and 8 mm height, with a 2921 mm length at a 40 degree angle. Compare those values against the old belt or the sheave groove.
- Where is a classical wrapped V-belt like this used?
- Classical wrapped V-belts are used on standard industrial drives, including older equipment and general power transmission where a moderate-speed, steady-load belt is appropriate. Confirm the drive accepts an A profile and a 2921 mm length.
- What should I send with my quote request?
- Send the part number AP113 and the quantity. If you are matching an existing belt, include the number on the old belt and its measurements so the team can confirm the fit or suggest an equivalent.