Timing belt Dayco 95282

DAYCO 95282 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 95282 and any equivalents.

The Dayco 95282 is an automotive timing belt with a 1000.25 mm pitch length, 105 teeth and a 22.1 mm width. It is a synchronous belt, so the tooth count and pitch length are the dimensions that matter when you match it to a drive.

For a timing belt, the profile and length tell you most of what you need before you open the catalog. The 1000.25 mm pitch length is measured along the pitch line, not the outside circumference, and the 105 teeth set the tooth pitch. Both numbers have to match the sprockets on the engine. The 22.1 mm width is the third check, because a belt that is too narrow will not sit correctly on the pulleys.

When you are replacing a timing belt, read the marking on the back of the old belt first. It usually carries the part number, and often the tooth count and pitch length as well. If the marking is worn or gone, count the teeth and measure the width. Send us the Dayco 95282 part number, or the numbers from the old belt, and we will confirm the match.

Timing belts are normally replaced as part of a job that includes the tensioner and any idler pulleys in the same drive. Inspect those parts for play, noise or a rough bearing before the new belt goes on, and check the sprockets for worn teeth or debris in the grooves. A clean, correctly tensioned drive is what lets the belt run its full service interval.