V-belt Dayco 9355
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 9355 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9355 and any equivalents.
The Dayco 9355 is an automotive V-belt with a 36° angle, a 7.11 mm width and a 901.7 mm effective length. Before you fit it, inspect the drive and sheaves, because worn or misaligned sheaves can shorten the life of any new belt. We carry this belt and quote it by part number.
Check the sheaves first. Look for grooves worn into the flanks, a step at the bottom of the groove, cracks, chips and rust. Run a straightedge across the pulley faces to see misalignment. Confirm the sheave groove matches a 36° belt and is not bottoming out. If the groove is worn, the new belt will sit too low and slip.
Spin the drive by hand and check each pulley for play, rough bearings and runout. Look for oil or grease on the sheaves, because it will transfer to the belt. Check the belt path for anything that rubs or chafes. If a tensioner or idler is part of the drive, check it turns freely and does not wobble.
The Dayco 9355 is listed with an effective length of 901.7 mm and a width of 7.11 mm. The marking on the back of the belt carries the part number, so read it before you order. Send that number, and the quantity you need, by WhatsApp or email and the team will reply promptly. If you are unsure of the number, send the old belt marking and the team can help confirm the right belt.
Dimensions
- Length
- 901.7mm
Frequently asked questions
- What are the dimensions of the Dayco 9355 belt?
- It is listed with a 36° angle, a 7.11 mm width and a 901.7 mm effective length.
- What should I check before fitting this belt?
- Inspect the sheaves for wear, cracks and misalignment, check pulley bearings for play, and clean off any oil or grease. A worn sheave groove will not hold the new belt correctly.
- How do I request a quote?
- Send the part number 9355, or the marking from the back of the old belt, by WhatsApp or email. The team will reply promptly and can help confirm the right belt.