V-belt Dayco 8V 1250
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 8V 1250 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1250 and any equivalents.
Matching a Dayco 8V 1250 to the belt you are replacing starts with the two markings that matter most: the profile and the length. This narrow wedge V-belt is built to the 8V profile and measures 3175 mm, so it can be checked directly against the old belt before you order. The same size is also listed under Optibelt 8V 1250.
Read the back of the belt you are taking off. Look for the profile and the length, then compare them with 8V and 3175 mm. If the old belt is worn, dirty or missing its marking, measure its length and confirm the profile before you request a quote. A belt that has been running in a drive may measure slightly different from a new one, so use the original marking as your primary reference.
The 8V profile and 3175 mm length identify this Dayco wedge belt. When you contact us, send the part number 8V 1250 along with any marking from the old belt. Our team can confirm the right belt or suggest an equivalent from the brands we carry. If the drive uses more than one belt, replace the full set so the load stays even across all belts.
Dimensions
- Section
- 8V
- Length
- 3175mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Check the marking on the back of your old belt for the 8V profile and the 3175 mm length. If those match, the Dayco 8V 1250 is the same size. Send us a photo or the old part number and we will help confirm it.
- What should I send for a quote?
- Send the part number 8V 1250, the quantity you need, and any marking from the belt being replaced. If you are unsure of the profile or length, include the drive details and we will help identify the correct belt.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, it is common practice to replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and load. Send the quantity of belts in the drive with your quote request.