V-belt Dayco 8V 1000
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 8V 1000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1000 and any equivalents.
This Dayco 8V 1000 belt is a narrow wedge V-belt in the 8V profile with a length of 2540 mm. The profile and length are the two numbers that matter when you are selecting a replacement or confirming a match to what is on the drive. If you already have the old belt in hand, the marking on the back should read 8V 1000.
The 8V profile identifies a narrow wedge cross-section, a design used where standard V-belts would take up more space or run at higher loads. The 1000 in the part number corresponds to the 2540 mm length. Before ordering, check that the drive uses an 8V section and that the current belt is marked 8V 1000. If the marking is worn off, measure the outside length and compare it to 2540 mm.
The same size is also listed under Mitsuboshi 8V 1000, Stark 8V 1000 and Optibelt 8V 1000, so you may see those brands on the shelf or in a manual. We carry the Dayco belt. For a quote, send the part number 8V 1000, the quantity, and any photos of the drive or the old belt marking. Our team can confirm the profile and length against your data and suggest an equivalent if needed.
Dimensions
- Section
- 8V
- Length
- 2540mm
Frequently asked questions
- What does the 8V profile mean on this belt?
- 8V is the narrow wedge profile. It sets the cross-section of the belt. This belt is also 2540 mm long, which is the 1000 in the part number.
- How do I confirm this is the right belt for my drive?
- Check the old belt for the marking 8V 1000. If it is unreadable, measure the outside length and compare it to 2540 mm. The drive must also accept an 8V section belt.
- What should I send to request a quote?
- Send the part number 8V 1000, the quantity you need, and a photo of the old belt or the drive if you have one. We will confirm the profile and length and reply with a quote.