V-belt Dayco 5VX 1320
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Cog wedged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and DAYCO: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5VX 1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1320 and any equivalents.
This Dayco 5VX 1320 is a cogged narrow V-belt in the 5VX profile with a length of 3352.8 mm. It is used on industrial drives where a narrow cross-section and cogged construction suit the pulley setup. Confirm fit by matching the profile and length to your existing belt and drive requirements.
Cogged narrow V-belts are common on industrial equipment such as pumps, fans, compressors and other driven machinery. The 5VX profile provides a narrow cross-section, and the cogged design is intended for drives where standard wrapped belts may not perform as needed. The 3352.8 mm length is specific to this part number, so verify it against your drive's required length before ordering.
To confirm fit, check the marking on the back of your old belt. It should show the profile and length. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 3352.8 mm listed here. Also inspect the pulleys for wear or damage that could affect belt performance.
The same size is also listed under Mitsuboshi 5VX 1320 and Stark 5VX 1320. If you need help confirming the right belt or an equivalent, send the part number and any photos of the old belt via WhatsApp or email. Our team can assist with cross-referencing and quote requests.
Dimensions
- Section
- 5VX
- Length
- 3352.8mm
Frequently asked questions
- What applications use the Dayco 5VX 1320?
- It is a cogged narrow V-belt for industrial drives. The exact application depends on your equipment's pulley setup and required length. Confirm the profile and length match your drive before use.
- How do I confirm the 5VX 1320 fits my drive?
- Check the marking on your old belt for the profile and length. The 5VX profile and 3352.8 mm length must match. If the marking is unreadable, measure the old belt and compare it to these specifications.
- Are there other brands listed for the same size?
- Yes, the same size is also listed under Mitsuboshi 5VX 1320 and Stark 5VX 1320. Contact us with your part number if you need help confirming an equivalent.