V-belt Dayco 5V 800
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5V 800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 800 and any equivalents.
The Dayco 5V 800 is a narrow wedge V-belt in the 5V profile with a length of 2032 mm. Narrow wedge belts are used on industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and other driven equipment. This page covers where this belt fits and how to confirm it is the right one for your drive.
On a narrow wedge drive, the belt runs in matched 5V sheaves and transmits power through the wedge-shaped cross section. Because the 5V profile is narrower than a classic V-belt, it seats deeper in the groove and is common on higher-load, space-conscious drives. If your equipment uses 5V pulleys, this is the correct profile family.
To confirm fit, read the marking on the back of the old belt. You are looking for the profile and the length designation, here 5V and 800, which corresponds to 2032 mm. Check that the sheave grooves are 5V and that the belt sits correctly in them without riding on the bottom. If the marking is worn off, measure the outside length and compare it to 2032 mm.
The same size is also listed under Mitsuboshi 5V 800 and Optibelt 5V 800, so those are alternative brand listings for this size. When you request a quote, send the part number 5V 800 and, if you have it, the old belt marking and a photo of the drive.
Dimensions
- Section
- 5V
- Length
- 2032mm
Frequently asked questions
- What does the 5V profile mean for my drive?
- 5V is the narrow wedge profile. It fits 5V sheaves and is used on industrial drives where the pulley grooves are cut for this profile. Confirm the groove profile on your sheaves before ordering.
- How do I confirm the length?
- The length for this belt is 2032 mm. Check the marking on the back of your old belt for the 5V and 800 designation, or measure the belt and compare it to 2032 mm.
- What should I send to get a quote?
- Send the part number 5V 800 by WhatsApp or email. If you have the old belt, include the marking and a photo of the drive so the team can confirm the profile and length.