V-belt Dayco 5V 2360
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and DAYCO: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5V 2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 2360 and any equivalents.
This Dayco 5V 2360 is a narrow wedge V-belt in the 5V profile with a length of 5994.4 mm. The profile and length are the two numbers that identify the belt on a drive, so they are what a replacement should match.
The 5V profile is the narrow wedge section, used where a standard V-belt would be wider than the sheave groove allows. The length of 5994.4 mm sets the belt around the drive; a belt of the same profile but a different length will not sit correctly in the sheaves or reach the take-up. When you read the marking on the back of the old belt, confirm both the 5V profile and the 2360 length reference before ordering.
The same size is also listed under Stark 5V 2360, Mitsuboshi 5V 2360 and Optibelt 5V 2360, so those markings identify the same profile and length. If the belt is one of several on a multi-belt drive, replacing the full set at the same time keeps the load shared evenly across the grooves. Inspect the sheaves for wear or grooves that have widened before the new belt goes on.
Dimensions
- Section
- 5V
- Length
- 5994.4mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 5V 2360, the brand Dayco, and the quantity you need by WhatsApp or email. If you have the old belt, a photo of the back marking helps confirm the profile and length.
- Can you confirm this is the right belt for my drive?
- Yes. The 5V profile and the 5994.4 mm length are the identifying dimensions. Send those numbers from your drive or old belt and the team will confirm whether the Dayco 5V 2360 matches.
- Is the same size offered under other brands?
- The same size is also listed under Stark 5V 2360, Mitsuboshi 5V 2360 and Optibelt 5V 2360. If your drive uses one of those markings, the Dayco 5V 2360 is the same profile and length.