Poly-V belt Dayco 5070975

DAYCO 5070975 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5070975 and any equivalents.

The Dayco 5070975 is an automotive multi-rib serpentine belt with 7 ribs, a width of 24.38 mm and an effective length of 2476.5 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true. Send the part number to MR Industrial Accessories for a quote.

A serpentine belt wears at the ribs and the sheave surfaces wear with it. Check each pulley for grooves, ridges, rust or debris, and confirm the ribs are clean and aligned. Spin the accessories by hand to feel for rough or loose bearings, and check the tensioner and any idler for smooth travel. A drive that is out of line or has a damaged sheave will shorten the life of a new belt.

Confirm the routing against the drive layout before you fit the Dayco 5070975. Seat the ribs fully in the pulleys, then check that the belt sits square on every sheave and that no rib is riding on a flange. After running the engine briefly, recheck alignment and tension. If the old belt shows edge wear, missing ribs or glazing, correct the cause before the replacement goes on.

The marking on the back of the belt is the quickest way to match the part. This belt carries the code 5070975, with 7PK2475 as an alias, 7 ribs, a width of 24.38 mm and an effective length of 2476.5 mm. Send the code, the alias or both, and the team at MR Industrial Accessories will confirm the right belt or suggest an equivalent.