Poly-V belt Dayco 5061360

DAYCO 5061360 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5061360 and any equivalents.

The Dayco 5061360 is a 6-rib automotive serpentine belt with an effective length of 3454.91 mm and a width of 20.83 mm. Before you fit it, take a few minutes to inspect the drive and its sheaves. A worn pulley or a misaligned accessory will shorten the life of any new belt.

Start with the sheaves. Run a straightedge across each pulley face and check for grooves worn into the ribs, nicks on the flanges, or rust and debris in the valleys. A sheave that has worn into a step will not seat the 6 ribs of the 5061360 correctly, and the belt will slip or run hot even when tension is right. Spin each accessory pulley by hand and listen for bearing noise.

Check alignment next. Lay a straightedge along the belt path and look for any pulley that sits out of plane; even a small offset will pull the belt to one side and feather its edges. Confirm the tensioner moves freely through its full travel and that the idler spins without roughness. If the old belt came off in pieces, find out why before installing the new one.

The belt is marked 5061360, with 6PK3455 listed as an alias. If you are comparing against the belt you removed, read the marking on the back and match the rib count and length. Send that part number by WhatsApp or email and the team will confirm the right belt or suggest an equivalent.