Poly-V belt Dayco 5060848
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Poly V automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5060848 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5060848 and any equivalents.
The Dayco 6PK2155 is a six-rib automotive serpentine belt with an effective length of 2152.65 mm and a width of 20.83 mm. It is the belt to look up when you are matching a worn drive belt by its marking. Confirm the number on the back of the old belt before you order.
To match this belt to the one being replaced, read the marking printed on the back of the old belt. A 6PK2155 marking points to this Dayco belt: six ribs, 2152.65 mm effective length, 20.83 mm width. If the marking is worn away, measure the old belt and count the ribs, then compare those figures against this listing. The part number 5060848 is the Dayco code for the same belt.
A serpentine belt that has been running on a worn or misaligned drive can measure shorter or longer than its original figure, so treat the printed marking as the primary reference and the measurement as a check. Inspect the pulleys and tensioner at the same time, and replace the belt if the ribs are cracked, glazed or missing material. Send the part number, the rib count and the length you measured for a quote.
Dimensions
- Grooves
- 6
- Length
- 2152.65mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads 6PK2155, this Dayco belt matches: six ribs, 2152.65 mm effective length, 20.83 mm width.
- What should I send to request a quote?
- Send the part number 6PK2155 or 5060848, along with the rib count and the length you measured from the old belt. The team can confirm the belt or suggest an equivalent.
- Can I measure the old belt instead of reading the marking?
- Yes, but use the marking first where it is legible. A used belt can measure differently from its original effective length, so the printed number is the more reliable reference.