V-belt Dayco 42695
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 42695 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 42695 and any equivalents.
The Dayco 42695 is an automotive V-belt with a 1765.3 mm effective length, a 33.02 mm width and a 40° angle. This is a trapezoidal belt for engine accessory drives such as alternator, water pump, fan or air conditioning service, where a single V-belt carries the load. Confirm fit by matching the profile, the effective length and the width to the drive before ordering.
To confirm the right belt, read the marking on the back of the old belt and compare it to the part number 42695. Then measure the effective length and the width at the top of the belt to check against 1765.3 mm and 33.02 mm. The 40° angle is the included angle of the V-profile, so the belt must sit correctly in the pulley groove.
Inspect the drive at the same time: look for worn or misaligned pulleys, glazing, cracks, missing chunks or a belt that sits too deep in the groove. If the drive runs more than one belt, replace the set together so the load is shared evenly. Send the part number, the belt marking and the measured length and width to MR by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 1765.3mm
Frequently asked questions
- How do I confirm the Dayco 42695 fits my drive?
- Match the part number on the back of the old belt to 42695, then check the effective length of 1765.3 mm and the width of 33.02 mm against your measurement. The 40° angle is the V-profile angle, so the belt must match the pulley groove.
- What do I send for a quote on this belt?
- Send the part number 42695, the marking on the old belt if it is readable, and the measured effective length and width. Photos of the belt and the drive help confirm the correct profile.
- Should I replace more than one belt at a time?
- If the drive uses a set of belts, replace them together so they share the load evenly. Check the pulleys for wear or misalignment at the same time.