V-belt Dayco 2B17590
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 2B17590 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2B17590 and any equivalents.
The Dayco 2B17590 is an automotive banded V-belt built for drives that need two V-belts to run as a single unit. It uses a 40° angle and measures 1498.6 mm effective length with a 28.7 mm width. This page covers where banded V-belts are used and how to confirm fit before you request a quote.
Banded V-belts are common on accessory drives where two or more V-belt sections must stay aligned and share the load. The 2B17590 is a two-section banded belt, so it is selected when the drive calls for a 2B profile rather than a single V-belt. The 40° angle and 28.7 mm width define the cross-section, while the 1498.6 mm effective length sets the belt's running circumference.
To confirm fit, read the marking on the back of the old belt and match the part number and profile. If the marking is worn, measure the effective length and width of the old belt and compare them to the 1498.6 mm and 28.7 mm figures listed here. Check that the drive pulleys are clean and aligned, and inspect the belt for cracks, glazing or missing sections before ordering a replacement.
When you request a quote, send the part number 2B17590 and, if possible, the belt marking and the drive it runs on. Our team can confirm the 2B banded V-belt and help you match the correct replacement.
Dimensions
- Length
- 1498.6mm
Frequently asked questions
- What does the 2B indicate on the Dayco 2B17590?
- The 2B indicates a banded V-belt with two V-belt sections joined by a top band. This construction keeps the sections aligned and shares the load across both belts on drives that require a 2B profile.
- How do I confirm the 2B17590 will fit my drive?
- Compare the belt's effective length and width to the old belt. The 2B17590 has a 1498.6 mm effective length and a 28.7 mm width. Also check the 40° angle and the 2B profile against the drive's requirements.
- What should I send with my quote request?
- Send the part number 2B17590 and any marking from the back of the old belt. If the marking is not readable, provide the measured effective length and width, and note the drive or equipment it runs on.