V-belt Dayco 28565

DAYCO 28565 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 28565 and any equivalents.

The Dayco 28565 is an automotive V-belt with a 22.35 mm top width and a 1435.1 mm effective length. The 38-degree angle matches the pulley groove it is built to run in. This page gives you the profile and length so you can confirm the belt against your drive before you request a quote.

The 22.35 mm width and 38-degree angle define how the belt sits in the pulley groove. The 1435.1 mm effective length is measured around the belt path, not the outside circumference, so it is the figure to compare with the old belt or the drive specification. The 28565 also carries the alias 20A1435.

When you request a quote, send the part number 28565 or the alias 20A1435, along with the width and length from the belt you are replacing. If the marking on the back of the old belt is worn or unreadable, measure the top width and the effective length and send those figures. We carry the Dayco line and can confirm the 28565 or suggest an equivalent from the same size.

For drives that run more than one belt, replace the full set at the same time so the load stays even across the grooves. Inspect the pulleys for wear, alignment and oil or debris while the belts are off. A belt that runs hot or turns over in the groove usually points to a pulley or tension problem rather than the belt itself.