V-belt Dayco 28530
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 28530 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 28530 and any equivalents.
The Dayco 28530 is an automotive V-belt with an effective length of 1346.2 mm, a width of 22.35 mm and a 38 degree angle. When a drive belt is worn or broken, the marking on the back of the old belt is the fastest way to identify what came off. Read it and match it against this page.
The back of a used belt usually carries the part number and the size, even when the printing is faded. Wipe the belt with a shop rag and read along the back face under good light. If the number reads 28530, this is the belt. The alias 20A1345 may also appear. Write down every character you can see, including the profile and length figures, before the belt is discarded.
If the marking is gone, measure what you can and compare it to the data here. This belt is 1346.2 mm in effective length, 22.35 mm wide, with a 38 degree angle. Those three figures are what the drive was built around, so a belt that does not match them will not sit correctly in the pulley grooves. Note that 1346.2 mm is the effective length, not the outside circumference, so a tape measure around the outside of the belt will read longer.
Send the part number from the back of the belt, or the three figures above, by WhatsApp or email and the team will confirm the Dayco 28530 or suggest an equivalent. Photos of the marking and of the drive help. If the drive runs more than one belt, note how many are on it so the set can be handled together.
Dimensions
- Length
- 1346.2mm
Frequently asked questions
- Where do I find the part number on this belt?
- On the back of the belt. Clean the back face and read along it; the number 28530 or the alias 20A1345 is printed there. If the printing has worn off, measure the belt and compare against the 1346.2 mm effective length, 22.35 mm width and 38 degree angle listed on this page.
- What do I send to get a quote for the Dayco 28530?
- Send the part number 28530, or the marking you read off the old belt, by WhatsApp or email. If you have the old belt in hand, a photo of the back face helps confirm the number. For a drive with more than one belt, tell us how many are needed.
- Does the belt length on the marking match the length on this page?
- The 1346.2 mm figure is the effective length, which is measured through the belt rather than around the outside. A tape measure run around the outer face of the belt will read longer than 1346.2 mm, so compare like with like when checking a belt against this listing.