V-belt Dayco 28473
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 28473 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 28473 and any equivalents.
The Dayco 28473 is an automotive V-belt with a 1200.15 mm effective length, a 22.35 mm width and a 38-degree angle. This belt also carries the alias 20A1200. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Start with the sheaves. Check the groove flanks for wear, scoring or a polished surface, and confirm the grooves are not spread or bottomed out. A worn sheave will not match the 38-degree angle of the belt, so the belt can slip or wear quickly even when the length and width are correct. Look for oil, debris or rust in the grooves and clean them before the belt goes on.
Next, check alignment and the rest of the drive. Confirm the pulleys line up and that no component has shifted on its mount. Turn the drive by hand and feel for bearing play, a binding pulley or a seized accessory. Check the tensioner, idler and any other belt on the drive, and replace a belt that is cracked, glazed or missing ribs.
The Dayco 28473 is identified by its 1200.15 mm effective length and 22.35 mm width, and the alias 20A1200 can help confirm what is on the machine now. Read the marking on the back of the old belt and compare it with these figures. If the numbers differ, send us the marking and photos of the drive for a quote.
Dimensions
- Length
- 1200.15mm
Frequently asked questions
- What are the dimensions of the Dayco 28473?
- It has a 1200.15 mm effective length, a 22.35 mm width and a 38-degree angle. The alias 20A1200 is also listed for this belt.
- Why check the sheaves before fitting this belt?
- The belt is built to a 38-degree angle. Worn or spread sheave grooves will not match that angle, which can cause slipping and short belt life.
- What should I send to request a quote?
- Send the part number 28473 or the alias 20A1200, plus the marking from the old belt and photos of the drive if you need help confirming the correct belt.