V-belt Dayco 24465
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 24465 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 24465 and any equivalents.
The Dayco 24465 is an automotive V-belt with a 19.05 mm width, a 38° angle and an effective length of 1181.1 mm. When you are replacing a belt, the marking on the old belt is the fastest way to confirm this one matches.
Take the old belt off and read the numbers printed on the back. If you see 24465 or 17A1180, this is the belt to quote. If the marking is worn or unreadable, measure the outside circumference and the top width, and note the profile. The 1181.1 mm effective length and 19.05 mm width are the two dimensions to compare against your drive.
Check the pulleys while the belt is off. Look for wear, grooves or misalignment that could have shortened the life of the old belt. A belt that is the correct length but the wrong width will sit at the wrong depth in the pulley and wear quickly. The 38° angle is part of the fit, so confirm the replacement carries the same angle.
If you are unsure, send a photo of the old belt marking along with the machine or engine details. We carry the Dayco 24465 and can confirm it against your application. For multiple drives, order the same number of belts as the drive requires so they run as a matched set.
Dimensions
- Length
- 1181.1mm
Frequently asked questions
- What part number should I send for a quote?
- Send 24465 or 17A1180. Either number identifies the Dayco automotive V-belt with a 1181.1 mm effective length and 19.05 mm width.
- How do I check the belt on the machine is the same size?
- Read the marking on the back of the old belt. If it is unreadable, measure the effective length and the top width and compare them to 1181.1 mm and 19.05 mm.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace all belts at the same time. A new belt running with worn belts can carry more load than the others and wear faster.