V-belt Dayco 24348
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 24348 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 24348 and any equivalents.
The Dayco 24348 is an automotive V-belt with a trapezoidal profile, an effective length of 882.65 mm, a width of 19.05 mm and a 38° angle. It is used on engine accessory drives where a single V-belt transmits power to components such as the alternator, water pump or power steering pump. This page covers how to confirm fit and what to send for a quote.
Automotive V-belts like this Dayco 24348 are selected by profile and length. The 38° angle and 19.05 mm width define the cross-section that must match the pulley groove, while the 882.65 mm effective length must suit the drive layout and tensioning range. When replacing a belt, read the marking on the back of the old belt and compare it with the part number and dimensions above.
To confirm fit, inspect the drive for pulley groove wear, misalignment and tensioner condition. A belt that is too wide will not seat correctly; one that is too long may not tension properly. If the old belt marking is unreadable, measure the effective length and cross-section, and note the vehicle or equipment make, model, engine and year.
For a quote, send the part number 24348, the old belt marking if legible, and the dimensions you measured. If you need help confirming the right belt or an equivalent, include the drive details and photos of the old belt and pulleys. We carry Dayco belts and reply promptly by WhatsApp or email.
Dimensions
- Length
- 882.65mm
Frequently asked questions
- How do I confirm that the Dayco 24348 fits my drive?
- Compare the belt's 38° angle, 19.05 mm width and 882.65 mm effective length with the old belt marking and the pulley groove dimensions. Also check that the drive layout and tensioner allow the belt to be tensioned correctly.
- What should I send for a quote on the Dayco 24348?
- Send the part number 24348, the old belt marking if readable, and the measured effective length and cross-section. If you need help confirming the right belt or an equivalent, include the vehicle or equipment make, model, engine and year, plus photos of the old belt and pulleys.
- Can you help if the old belt marking is worn off?
- Yes. Measure the effective length and cross-section, and provide the drive details. We can help confirm the right belt or suggest an equivalent based on the dimensions and application.