V-belt Dayco 22458

DAYCO 22458 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22458 and any equivalents.

The Dayco 22458 is an automotive V-belt with a 17.53 mm top width and a 38 degree angle. Its effective length is 1162.05 mm, measured around the belt. This is the type of belt used on engine accessory drives, where it turns the alternator, water pump, power steering pump or air conditioning compressor.

To confirm fit, read the marking on the back of the old belt and compare it with the part number and length above. If the old belt is worn, stretched or its marking is unreadable, measure the effective length around the belt and check the width and angle against the values listed here. A belt that has run hot or slipped may no longer match its original dimensions, so the drive pulleys should also be checked.

Inspect the pulleys for wear, misalignment and oil or coolant contamination before installing a replacement. A belt that is too wide will not sit correctly in the groove, and one that is too narrow will bottom out and slip. Tension should be set to the drive specification, and the belt should be rechecked after the engine has run and cooled.

When requesting a quote, send the part number 22458 or the alias 15A1160, along with the width and length if you have them. If you are unsure of the correct belt, send a photo of the marking on the old belt and the drive layout, and the team can help confirm the right belt or suggest an equivalent.