V-belt Dayco 22355
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 22355 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22355 and any equivalents.
The Dayco 22355 is an automotive V-belt with a listed effective length of 901.7 mm and a width of 17.53 mm. Its profile is trapezoidal with a 38° angle. Use this page to confirm the specification before sending your quote request.
When requesting a quote, include the part number 22355 and the alias 15A0900 if it appears on your old belt. The key dimensions to confirm are the 901.7 mm effective length, the 17.53 mm width and the 38° angle. If the marking on the back of the belt matches these values, the request can be processed without back-and-forth.
If the belt is worn or the marking is unreadable, measure the effective length and width and note the profile angle. The Dayco 22355 is a trapezoidal automotive V-belt, so the cross-section should be compared against the original. Send the measurements along with the part number or alias to help confirm the correct belt.
For drive inspection, check the pulley grooves for wear and verify that the belt sits correctly. A belt that is too wide or too narrow for the groove will not transmit power properly. If you are replacing more than one belt on the same drive, include the quantity and position in your request.
Dimensions
- Length
- 901.7mm
Frequently asked questions
- What part number should I send for a quote?
- Send the Dayco part number 22355. If your old belt is marked with the alias 15A0900, include that as well so the request can be matched correctly.
- Can you help if the belt marking is worn off?
- Yes. Provide the effective length, width and profile angle measured from the old belt. For the Dayco 22355, the listed values are 901.7 mm effective length, 17.53 mm width and 38° angle.
- What if I need more than one belt for the same drive?
- Include the quantity and the position on the drive in your quote request. Replacing belts in sets helps maintain consistent tension and wear across the drive.