V-belt Dayco 17500

DAYCO 17500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17500 and any equivalents.

The Dayco 17500 is an automotive V-belt with a 13.46 mm width, a 36° angle and a 1270 mm effective length. It is also listed under the alias 13A1270. To match it to the belt you are replacing, compare the marking on the old belt and measure its effective length.

Start by reading the marking on the back of the belt you are replacing. If it reads 17500 or 13A1270, this is the same listing. Then check the profile: the belt is 13.46 mm wide with a 36° angle, and its effective length is 1270 mm. A belt that is narrower, wider or a different length will not sit correctly in the pulley grooves.

When the old marking is worn off, measure the effective length around the belt path rather than the outside circumference. Compare that figure with 1270 mm and confirm the width and angle against the pulley grooves. If the drive runs more than one belt, inspect all of them and replace the set together so the load stays even.

Send the part number 17500, the alias 13A1270 or the marking from the old belt when you request a quote. If the number is unreadable, send the width, the angle and the effective length you measured, and the team can help confirm the right belt.