V-belt Dayco 17465
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 17465 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17465 and any equivalents.
The Dayco 17465 is an automotive V-belt with a 13.46 mm top width and an effective length of 1181.1 mm. The 36° angle matches the pulley groove it is designed to run in. This page is for maintenance and purchasing staff who need to confirm the belt on the machine before ordering.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Confirm the part number 17465 or the alias 13A1180, then check the profile: 13.46 mm width, 36° angle and 1181.1 mm effective length. If the old belt is worn or the marking is gone, measure the effective length around the pulley set and compare it with 1181.1 mm.
Inspect the drive before fitting a new belt. Check the pulley grooves for wear, oil or debris, and confirm the pulleys turn freely and align. A belt that is the correct length but the wrong cross-section will not sit correctly in the groove, so verify the 13.46 mm width and 36° angle against the pulley profile.
When you request a quote, send the part number 17465, the alias 13A1180, and a photo of the belt marking if you have one. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent. If you are replacing more than one belt on the same drive, list every part number so the set can be checked together.
Dimensions
- Length
- 1181.1mm
Frequently asked questions
- How do I confirm the Dayco 17465 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. Look for 17465 or the alias 13A1180, then compare the profile: 13.46 mm width, 36° angle and 1181.1 mm effective length. If the marking is unreadable, measure the effective length around the pulleys and check the pulley groove width.
- What should I send with my quote request?
- Send the part number 17465, the alias 13A1180 if it appears on the belt, and the machine or drive it fits. A photo of the belt marking helps us confirm the profile and length before we reply by WhatsApp or email.
- Can I order this belt for a drive that uses more than one belt?
- Yes. List every belt position on the drive with its part number so the set can be checked together. Replacing belts in sets helps keep matched lengths and profiles consistent across the drive.