V-belt Dayco 17455

DAYCO 17455 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17455 and any equivalents.

The Dayco 17455 is an automotive V-belt with a 13.46 mm top width, a 36° angle and an effective length of 1155.7 mm. It is the belt to reach for when a drive calls for a classic trapezoidal profile rather than a serpentine or timing belt. Confirm the fit against the old belt's markings and the drive's pulley groove before ordering.

Automotive V-belts like this one run accessories and auxiliary drives on older and simpler engine layouts, where a single trapezoidal belt sits in a matched pulley groove. The 36° angle and 13.46 mm width are the two dimensions that locate the belt in that groove; the 1155.7 mm effective length is measured around the pulley path, not the outside circumference of the belt lying flat on a bench.

To confirm fit, read the marking on the back of the old belt and compare it with the Dayco 17455. If the old belt is worn, stretched or glazed, its measured length will not match the original specification, so trust the printed number rather than a tape measure. Check the pulley grooves for wear, oil or debris at the same time; a groove that has widened will let even a correct belt sit too deep and slip.

When you send your quote request, include the part number 17455, the alias 13A1155 if that is what is stamped on the belt, and the width and length you need. A photo of the back of the old belt and of the drive routing helps the team confirm the right belt or suggest an equivalent. We carry Dayco belts and reply by WhatsApp or email.