V-belt Dayco 17410

DAYCO 17410 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17410 and any equivalents.

The Dayco 17410 is an automotive V-belt with a 13.46 mm width and a 36° angle, listed at a 1041.4 mm effective length. For a maintenance or purchasing professional, those three figures are the whole story: they define how the belt sits in the pulley groove and how it runs around the drive. This page covers what the profile and length tell you before you order.

Width and angle work together. At 13.46 mm across the top and 36° between the flanks, this is a standard automotive V-belt profile, not a narrow wedge or a cogged construction. The belt seats by its flanks, so the angle has to match the pulley groove. A belt that is too wide sits proud of the groove and slips; one that is too narrow bottoms out and loses grip. The 13.46 mm width is the figure to check against the old belt and the pulley.

The 1041.4 mm effective length is measured around the pitch line, the running circumference the belt actually travels. That is the number to compare when you read the marking on the back of the old belt or measure a used one. A belt that is too long will not tension correctly; too short, and it will not fit over the pulleys without forcing the drive.

If you are replacing a belt on a drive with more than one V-belt, inspect all of them and replace as a set. Belts that have run together wear together, and mixing a new belt with worn ones changes how the load is shared. Send the part number and the width and length from the old belt, and we will confirm the Dayco 17410 or suggest an equivalent.