V-belt Dayco 15495
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 15495 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15495 and any equivalents.
The Dayco 15495 is an automotive V-belt with an 11.18 mm top width and a 36-degree angle. Its effective length is 1257.3 mm, and it also carries the alias 11A1255. This page covers how to verify the belt on your equipment and what to send for a quote.
The most reliable way to confirm this belt is to read the marking on the back of the old belt. Look for 15495 or 11A1255, then compare the width and effective length against the values above. A worn belt can measure short, so use the printed marking as the primary reference.
If the marking is rubbed off, measure the effective length and top width and send both figures along with your equipment details. We carry the Dayco 15495 and can confirm it against your drive or suggest an equivalent from the specifications you provide.
Inspect the drive while the belt is off. Check the pulleys for wear, alignment and any damage that could shorten belt life. When a drive uses more than one belt, replace the full set so the load stays evenly distributed across the grooves.
Dimensions
- Length
- 1257.3mm
Frequently asked questions
- How do I confirm the Dayco 15495 is the right belt?
- Read the marking on the back of the old belt. If it shows 15495 or 11A1255, the belt matches this listing. You can also measure the top width and effective length and compare them with 11.18 mm and 1257.3 mm.
- What should I send to request a quote?
- Send the part number, 15495 or 11A1255, through WhatsApp or email. If the marking is unreadable, include the measured top width and effective length, plus the equipment make and model, so we can confirm the belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- On drives that use multiple belts, replace the full set together. Mixing a new belt with worn belts can cause uneven loading and uneven wear across the grooves.