V-belt Dayco 15405
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 15405 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15405 and any equivalents.
The Dayco 15405 is an automotive V-belt with an 11.18 mm top width and a 36-degree angle. Its effective length is 1028.7 mm, so the profile and length together define the drive it fits. Use both figures when comparing a replacement to the belt you are removing.
The 36-degree angle and 11.18 mm width identify the belt's cross-section, while the 1028.7 mm effective length is measured around the pulley path. A belt that matches one figure but not the other will not sit correctly in the sheave grooves or reach the tensioner range. Check the marking on the old belt and confirm the profile and length before ordering.
The Dayco 15405 is also listed under the alias 11A1030. If the belt on the drive carries either number, this is the same item. For a quote, send the part number, the quantity, and the drive or equipment it serves. If you are unsure of the number, send the old belt's marking and we can confirm the match or suggest an equivalent.
Inspect the pulleys and tensioner when you replace the belt. Worn grooves or a weak tensioner can shorten the life of a new belt, so address those before installation. When a drive uses more than one belt, replace the full set so the load stays even across all belts.
Dimensions
- Length
- 1028.7mm
Frequently asked questions
- What do the profile and length tell me about the Dayco 15405?
- The profile is set by the 36-degree angle and 11.18 mm width, and the length is 1028.7 mm effective. Both must match the drive for the belt to seat and tension correctly.
- The belt on my machine is marked 11A1030. Is that the same as the Dayco 15405?
- Yes. 11A1030 is an alias for the Dayco 15405, so either number identifies the same belt.
- What should I send to request a quote?
- Send the part number and the quantity you need. If you do not have the number, send the marking on the old belt and the drive it fits, and we will confirm the match or suggest an equivalent.