V-belt Dayco 15355
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 15355 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15355 and any equivalents.
The Dayco 15355 is an automotive V-belt with an effective length of 901.7 mm, a 36-degree angle, and a width of 11.18 mm. To match it to the belt you are replacing, read the marking on the back of the old belt and confirm the profile and length. If the marking is worn or missing, measure the old belt and compare it to these dimensions.
Start by locating the part number on the back of the belt you are replacing. If it reads 15355 or the alias 11A0900, this belt matches those markings. If the marking is unreadable, measure the effective length and the top width of the old belt and compare them to 901.7 mm and 11.18 mm. The 36-degree angle is the profile angle to check against the pulley grooves.
A used belt can stretch or wear, so a direct measurement may not equal the original specification. When in doubt, send the old belt's marking or your measurements with your quote request. We carry the Dayco 15355 and can confirm it against the data you provide.
Before installing, inspect the pulleys for wear, alignment, and debris. A worn pulley can damage a new belt even if the size is correct. If the drive uses multiple belts, replace them as a set so they wear evenly.
Dimensions
- Length
- 901.7mm
Frequently asked questions
- How do I confirm the Dayco 15355 is the right belt for my drive?
- Check the marking on the back of your old belt. If it shows 15355 or 11A0900, this belt matches. If not, measure the old belt's effective length and width and compare them to 901.7 mm and 11.18 mm.
- What should I send to request a quote for this belt?
- Send the part number 15355 or the alias 11A0900, along with the marking from your old belt or its measured effective length and width. Photos of the old belt and the drive pulleys help us confirm the match.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in the drive as a set. Belts wear and stretch together, and mixing a new belt with used ones can cause uneven tension and premature wear.