V-belt Dayco 11375
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 11375 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 11375 and any equivalents.
The Dayco 11375 is an automotive V-belt with a 952.5 mm effective length, an 8.38 mm width and a 36° angle. It is built for the kind of replacement where the old belt is still on the drive and you need a direct match. The simplest way to order is to read the marking on the back of the belt and send that part number to us.
Matching starts with the number on the belt, not with a guess from the outside. If the old belt is worn or the marking has rubbed off, measure the effective length and the width, and note the 36° angle. The Dayco 11375 is also listed under the alias 08A0955, so either marking can identify the same belt.
Before the new belt goes on, inspect the pulleys for wear, misalignment or oil contamination. A belt that tracks poorly or wears on one side usually points to a drive problem rather than a belt problem. Replace belts in sets where the drive uses more than one, so the load stays even.
Send the part number 11375 or 08A0955 by WhatsApp or email and we will confirm the belt or suggest an equivalent. If you are unsure of the number, send the length, width and angle from the old belt, along with a photo of the marking, and we will take it from there.
Dimensions
- Length
- 952.5mm
Frequently asked questions
- How do I confirm the Dayco 11375 is the right belt?
- Check the marking on the back of the belt you are replacing. The 11375 and the alias 08A0955 both identify this belt. If the marking is gone, compare the effective length of 952.5 mm, the width of 8.38 mm and the 36° angle.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, replace them as a set. Mixing a new belt with worn belts changes how the load is shared and can shorten the life of the new belt.
- What should I send for a quote?
- Send the part number 11375 or 08A0955 by WhatsApp or email. If you do not have the number, send the effective length, width and angle, plus a photo of the old belt marking, and we will confirm the match.