BROWNING VFBB-220S flange mounted bearing
- Brand
- BROWNING
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VFBB 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BROWNING VFBB-220S belongs to flange mounted bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for VFBB-220S and any equivalents.
The VFBB flange housing with insert bearing is a mounted bearing unit that arrives fully assembled. It is fastened to a flat surface using four bolts, making it suitable for supporting transmission shafts where a flange mount is needed instead of a pillow block. MR Industrial Accessories supplies Browning products to customers throughout the United States and Latin America.
The part number follows a pattern: VFBB denotes the flange housing family with insert bearing, the following digits indicate the size within the 200 series, and the trailing S shows the sealing option of the insert. For example, VFBB-220S and VFBB-232S have the same overall design but accept different shaft and housing sizes. If your equipment uses a different number, share the complete part number and we will help identify it.
These units are common in conveyors, belts, elevators, mixers, blowers and process lines where the shaft is supported on a plate or structural face. Food, chemical and aggregate plants often select them because the insert is easy to replace and the sealing helps keep lubricant in and contaminants out. MR Industrial Accessories supplies them from Miami to customers across the United States and several Latin American countries.
When selecting a unit, begin with the shaft diameter and the load on the support. Then verify the distance between the flange bolt holes and the available space around the mounting face. During installation, place the flange on a clean, flat surface, tighten the bolts in a cross pattern, and check shaft alignment before startup. The insert is self-aligning, but lubrication and clearance should be checked according to operating conditions.
Interchange between brands is based on shaft diameter, housing type and locking method, not on the commercial part number. The same size may have different nomenclature from one manufacturer to another, so equivalence is confirmed by measuring the shaft and the flange. If you are replacing a Browning unit or one from another brand, send those measurements and we will suggest a compatible alternative.
If you need a variant that is not shown, contact us on WhatsApp or by email with the part number or the model your equipment requires. We will quote it and point you to a compatible option promptly.
Dimensions
- Número de producto
- 19487
- Bore
- 1 1/4 in
Frequently asked questions
- What is the difference between VFBB-220S and VFBB-232S?
- Both share the same flange housing configuration with insert bearing, but they differ in size. Each number in the 200 series corresponds to a different housing and shaft size. Send the part number from your equipment and we will confirm which one fits.
- How do I choose a replacement housing?
- Measure the shaft diameter, the distance between the flange bolts and the mounting space. With that information and the part number of the old unit, we will quote an equivalent option. If the shaft is worn, account for that before deciding on the size.
- Can it be mounted in any orientation?
- The flange is bolted to a flat face with the bolts tightened in a cross pattern, and the self-aligning insert accommodates the shaft. The surface must be clean and flat, and the shaft should be aligned with the opposite support to avoid premature wear.