BGL OHS3136H hydraulic sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL OHS3136H belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OHS3136H and any equivalents.
The BGL OHS…H hydraulic sleeve is an adapter sleeve with internal and external oil channels. Pressurized oil is injected through these channels to assist with mounting and, more importantly, with dismounting. It is intended for medium and large shafts, starting at 140 mm, where tapered fits must be secure yet still allow controlled removal.
The part number OHS…H breaks down as follows: OHS denotes the hydraulic sleeve series; the digits that follow, such as 2334 or 3036, specify the size and dimensions; the trailing H shows that the oil channel is positioned on the outer side. That H matters because it determines where the pressurized oil enters, so mounting and dismounting proceed without harming the shaft or the sleeve. Sizes OHS2334H, OHS2336H, OHS2338H, OHS2340H, OHS3034H, OHS3036H, OHS3038H and OHS3040H span a range of shaft diameters.
These sleeves appear in heavy industries that handle large shafts, such as steel, cement, mining, paper, energy and heavy machinery. They secure bearings, pulleys, couplings and other components onto tapered shafts, where the connection must be strong but still removable without impacts or heat. In plants with planned maintenance and limited downtime, the hydraulic sleeve makes it easier to take off parts that might otherwise be stuck from rust or the fit itself.
When choosing a sleeve, consider the shaft diameter, the taper and the component being secured. Pressurized oil is part of the procedure: it is injected through the channels to form a film that cuts the effort needed for mounting and dismounting. Before assembly, confirm that the tapered surfaces are clean and free of burrs, and that the correct oil is used. Proper alignment and axial adjustment following the manufacturer's instructions keep the connection from moving.
Hydraulic sleeves from various brands can be used interchangeably if the main dimensions, taper and oil channel location are the same. If you have a part number from another brand or an unidentified part, send us the details and we will identify the compatible alternative. MR Industrial Accessories is an official distributor of BGL in the USA. To request a quote, send the part number or the size you need by WhatsApp or email; our team replies promptly and can suggest equivalents or help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How does a hydraulic sleeve differ from a standard adapter sleeve?
- A hydraulic sleeve includes internal and external channels that allow pressurized oil to be injected. This reduces the effort needed for mounting and, especially, for dismounting, and helps prevent surface damage. A standard sleeve lacks those channels.
- What shaft diameters suit the OHS…H series?
- It is made for medium and large shafts, from 140 mm upward. It is the right choice when the tapered fit is firm and you need to disassemble without impacts or heating. Smaller diameters are covered by other sleeve lines.
- How can I get a quote for an OHS…H sleeve?
- Contact us on WhatsApp or by email with the full part number or the shaft size and the component to be secured. We will respond promptly. If you have another brand's part number, we can also provide the equivalent.