BGL OHE3156HTL hydraulic sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL OHE3156HTL belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OHE3156HTL and any equivalents.
For shafts from 140 mm upward, the BGL OHE…HTL hydraulic sleeve uses internal and external oil channels to make fitting and removal easier. It holds bearings, pulleys, gears and similar components on the shaft, which helps maintenance work and lowers the chance of damaging the parts.
Reading the code: OHE means a hydraulic sleeve with an oil channel on the outside. The digits that follow — 3144, 3148, 3152, for example — give the size. HTL marks the version that has both internal and external channels. So OHE3144HTL, OHE3148HTL and OHE3152HTL are the same series in different sizes, all intended for shafts from 140 mm, where hydraulic help is needed to mount and dismount.
These sleeves are common in demanding settings such as mining, cement, steel, paper and grinding operations, and in gearboxes, mills, presses and other large machines. Injecting oil under pressure shortens maintenance shutdowns and avoids the impacts or heat that can harm the shaft or the bearing.
When choosing a sleeve, check the shaft diameter, the tolerance and the mounting clearance. Pressurized oil is injected between the surfaces to form a film that cuts friction. Align the sleeve properly and clean the channels before use. Follow the manufacturer's instructions for oil pressure and for the mounting and dismounting sequence.
BGL hydraulic sleeves can be replaced by equivalent products from other makers that share the same dimensional standard. If you have a part number from another brand or an unidentified part, MR Industrial Accessories will quote it and point out the compatible alternative. Since interchangeability depends on dimensions and channel type, it is wise to confirm the full designation.
To get a quote for the BGL OHE…HTL hydraulic sleeve you need, send the part number or exact size by WhatsApp or email to MR Industrial Accessories. The team replies promptly. If the variant you want is not listed, write with the model and it will be quoted.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How does a hydraulic sleeve differ from a standard adapter sleeve?
- A hydraulic sleeve has internal and external channels for injecting pressurized oil, which simplifies mounting and, above all, dismounting. A standard adapter sleeve lacks these channels. For that reason, the hydraulic type is suggested for medium and large shafts, from 140 mm.
- How do I interpret the part number OHE3144HTL?
- OHE stands for a hydraulic sleeve with an external oil channel, 3144 is the size number, and HTL indicates the version with both internal and external channels. OHE3148HTL and OHE3152HTL follow the same pattern.
- What should I keep in mind when mounting it?
- Verify the shaft diameter and tolerance. Clean the channels thoroughly and apply pressurized oil as the manufacturer instructs. Proper alignment and sufficient lubrication are essential to prevent damage during mounting and dismounting.