BGL OHE3036HE hydraulic sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL OHE3036HE belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OHE3036HE and any equivalents.
The BGL OHE HE hydraulic sleeve is an oil-injection fastening element with channels on both the inner and outer surfaces. Pumping oil under pressure creates a film that lowers friction, which makes installation easier and, more importantly, simplifies removal on medium and large shafts starting at 140 mm. Typical uses include securing bearings, pulleys, gears and similar components in demanding transmission assemblies.
Reading the OHE…HE code: OHE marks the BGL hydraulic sleeve family, the digits that follow define the inner and outer diameter combination, and the HE ending tells you the oil injection channel sits on the outer side. In OHE3032HE, OHE3034HE and OHE3036HE the size differs, while OHE3132HE and OHE3134HE show a different diameter pairing. When requesting a quote, provide the full code exactly as it appears on your drawing or on the component itself.
These sleeves suit power transmission equipment that must be taken apart periodically: gearboxes, mills, presses, cranes, road and earthmoving machinery, and continuous process lines. Industries such as metallurgy, cement, mining, oilseed processing and power generation select them because the assembly can be serviced without harming the seat or the shaft.
Selection depends on four values: shaft diameter, housing diameter, usable width and the injection pressure specified by the manufacturer. During mounting, clean and degrease the mating surfaces, line up the sleeve with the shaft and bore, then pump oil through the channels until the parts slide into place. Removal follows the same logic, using oil pressure together with a controlled extraction. Proper lubrication and alignment help prevent surface marks and extend the life of the fit.
BGL OHE HE hydraulic sleeves can replace equivalent products from other makers when dimensions and channel type match. Compare inner diameter, outer diameter, width and the position of the oil channel. If you only have a competitor code or an unidentified part, send it to us and we will point you to the compatible option.
To request a quote for your BGL OHE HE hydraulic sleeve, send the code or the exact dimensions via WhatsApp to MR Industrial Accessories. We respond promptly with the reference you need.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How is a hydraulic sleeve different from a standard adapter sleeve?
- A hydraulic sleeve includes inner and outer channels that let you inject oil under pressure. The resulting lubricating film cuts friction and makes mounting and, above all, dismounting easier. A standard sleeve lacks those channels and is fitted by direct interference.
- What shaft sizes is the BGL hydraulic sleeve intended for?
- It targets medium and large shafts, from 140 mm upward. At those diameters the effort to mount and remove is significant, and oil injection reduces the work. Smaller shafts typically use conventional adapter sleeves.
- How do I get a quote for a BGL OHE HE hydraulic sleeve?
- Send the complete code (for example OHE3032HE) or the shaft, housing and width dimensions via WhatsApp. We quote promptly. If the part is unidentified, share a photo and dimensions so we can guide you.