BGL OHA3132HL hydraulic sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL OHA3132HL belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OHA3132HL and any equivalents.
The BGL OHA HL hydraulic sleeve uses internal and external oil passages to make fitting and removal easier on medium and large shafts. It holds bearings, pulleys, gears and similar components in place while lowering the force needed and the chance of surface damage.
The code breaks down simply: OHA marks the BGL hydraulic sleeve series, and HL tells you the oil channel sits on the outside. The numbers in between, as in OHA2332HL, OHA2340HL, OHA3132HL, OHA3134HL, OHA3136HL, OHA3138HL and OHA3140HL, carry the main dimensions. To pick the right one, note your shaft diameter and seat dimensions; with those figures we can quote the exact reference.
These sleeves appear in heavy-duty settings such as steel mills, cement plants, mining operations, paper lines and food processing, wherever large shafts are found. Gearboxes, mills, conveyors, pumps and industrial fans are typical locations. Because oil can be injected under pressure, maintenance work becomes simpler and shutdown time in continuous operations is reduced.
When choosing a hydraulic sleeve, check that its dimensions line up with the conventional adapter sleeve it replaces. Proper oil lubrication is essential: it lets the sleeve expand slightly and slide without harming the shaft or housing. On assembly, keep everything aligned and clean; on removal, use the oil pressure specified for the size so the joint releases in a controlled way.
For cross-reference purposes, BGL OHA HL sleeves can stand in for other oil-channel adapter sleeves from various makers when dimensions and channel type agree. If you only have another brand's code or an unmarked part, send the details and we will point you to a compatible option. Since interchangeability depends on dimensions and the job, each case should be confirmed.
To get a quote for your BGL OHA HL hydraulic sleeve, message us on WhatsApp with the code or the dimensions you need. MR Industrial Accessories responds promptly with the exact reference and purchasing details. We can also help if you are unsure about selection or installation.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How does an OHA HL hydraulic sleeve differ from a standard adapter sleeve?
- The OHA HL sleeve includes inner and outer channels for pressurized oil, which eases mounting and especially dismounting. A standard adapter sleeve lacks these channels, so removal requires other methods.
- What shaft sizes is this sleeve intended for?
- It is made for medium and large shafts, from 140 mm and above. If your shaft is in that range, contact us with the exact dimensions and we will quote the matching OHA HL reference.
- How do mounting and dismounting work with pressurized oil?
- Oil is injected through the sleeve channels to form a film that cuts friction. This lets the sleeve slide during mounting and release during dismounting with less effort. Follow the pressures and procedure specified for each size.