BGL OH3192TLH hydraulic sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Hydraulic sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL OH3192TLH belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OH3192TLH and any equivalents.
The OH...TLH hydraulic adapter sleeve from BGL is a shaft-to-hub connecting element that carries load through interference fit. Its design includes internal and external oil channels, so pressurized oil can be introduced to assist both installation and, more importantly, removal on large-diameter shafts. It is intended for medium and large shafts starting at 140 mm where disassembly must be clean and free of damage.
Reading the code: the OH prefix denotes the BGL hydraulic sleeve family. The digits in the middle, as in OH3192TLH, set the size and main dimensions. The TLH suffix marks the version with oil channels. A final H means the injection channel is on the outer side, which affects how you access the sleeve during mounting. For a quote, send the full code from the drawing or the part itself.
Typical users are continuous-process plants that rely on large shafts and need connections that can be taken apart: steel, cement, mining, paper, energy and water treatment. You will find these sleeves in gearboxes, mills, presses, high-flow pumps and heavy transmission drives. Injecting oil lowers the chance of seizure and lets the sleeve come off without hammering or heavy heating, which matters when downtime must stay short.
When choosing a sleeve, check the shaft diameter (from 140 mm, depending on series), the hub bore, the contact width and the load to be transmitted. Before mounting, clean the surfaces and confirm alignment. Feed oil through the channels with a hand pump until the sleeve seats without force. On removal, the oil film cuts friction and eases extraction. Follow the manufacturer's oil pressure and tightening sequence.
BGL hydraulic sleeves can replace other brands that share the same dimensional and oil-channel standard. Compare bore diameter, outer diameter, overall width and channel position (inner or outer). If a competitor's code does not match, our technical team can identify the equivalent from your measurements or drawing. Not every series interchanges, so validate the geometry before substituting.
For a BGL hydraulic sleeve or to confirm an equivalent, message us on WhatsApp with the code OH3192TLH or your shaft and hub dimensions. MR Industrial Accessories quotes promptly and helps you select the right part.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How does a hydraulic sleeve differ from a standard adapter sleeve?
- The hydraulic version has internal and external channels for pressurized oil. That makes mounting easier and, above all, simplifies removal from large shafts. A standard adapter sleeve lacks these channels and typically needs more effort to extract.
- What shaft sizes does the OH...TLH series cover?
- It is made for medium and large shafts from 140 mm upward. Each code in the series corresponds to a specific diameter and width range. Send your shaft and hub measurements so we can quote the correct sleeve.
- How can I find the equivalent to another brand?
- Contact us on WhatsApp with the original part number, your shaft and hub dimensions, or a photo of the drawing. We will identify the matching BGL reference and provide a quote.