BGL OH2332HL hydraulic sleeve

BGL OH2332HL belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for OH2332HL and any equivalents.

The BGL OH...HL hydraulic sleeve is a fastening component that fits between the shaft and the bearing. It secures the joint and simplifies both mounting and dismounting. Instead of relying on a conventional adapter sleeve design, it has inner and outer channels through which pressurized oil is injected, which reduces the effort needed to install or remove the part. It is intended for medium and large shafts, from 140 mm in diameter.

Reading the code helps you confirm what you are ordering. The series uses OH followed by a four-digit number and the HL suffix, as in OH2332HL, OH2340HL, OH3132HL, OH3134HL, OH3136HL, OH3138HL and OH3140HL. The first two digits point to the bearing series; the next two, multiplied by 5, give the bore in mm, so OH2332HL corresponds to a 160 mm bore. The HL suffix means the oil channel sits on the outer side, which sets how the oil is injected during mounting and dismounting.

These sleeves suit equipment with large-diameter shafts, where installation and removal call for controlled methods. Typical applications include rolling mills, presses, mills, paper machines, cranes and large conveyors. They are also used in metallurgical, cement, mining and power generation operations to secure bearings on shafts that are taken apart frequently or that run under high loads.

Selection starts with the shaft diameter and the bearing to be secured, because the dimensions match those of the equivalent adapter sleeve. For mounting, oil is injected through the channels to form a film that eases sliding; the pressure is then released and the part stays fitted. Keep the channels clean before use, use the recommended oil and check alignment of the assembly to avoid deformation.

BGL hydraulic sleeves can be interchanged with those of other brands that follow the same dimensional standard. If you have a code from another brand or an unidentified part, MR Industrial Accessories can point you to the compatible equivalent. Interchangeability rests on standardized dimensions rather than the commercial code, so confirm the diameter and the channel type before replacing.

To request a quote, send the complete code, such as OH2332HL, or the shaft and bearing dimensions by WhatsApp or email. MR Industrial Accessories quotes the exact code or size you ask for and helps you confirm it is the correct part. We reply promptly and can suggest equivalents and help you choose.