BGL MS3152-MS3156 locking clip
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Lock washer
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL MS3152-MS3156 belongs to locking clip, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MS3152-MS3156 and any equivalents.
For maintenance teams working with bearings on tapered sleeves, the BGL MS series lock washer keeps the HM nut from backing off. It sits over the nut and a screw holds it in place, so the nut stays put even when vibration or rotation is present. This positive locking action helps preserve the tightening and internal clearance set during mounting.
The MS code is not a single size. Each reference such as MS3048-MS3052 or MS3064-MS3068 covers a pair of positions, meaning the washer fits more than one HM nut combination. The numbers after MS relate to the sleeve size and the nut it works with. To pick the right washer, first identify the HM nut on your sleeve, then match it to the corresponding MS code.
These washers appear in demanding settings: metallurgy, cement, mining and food processing. You will find them on gearboxes, mills, conveyors, pumps and fans where bearings are mounted on tapered sleeves. Anywhere the nut must be positively locked against vibration or alternating loads, the MS washer is the part that keeps the assembly from loosening.
Selection starts with the HM nut. Confirm that the MS code matches that nut before ordering. During installation, clean the threads, torque the nut to the recommended value, then fit the washer and its screw. Make sure the tab or tongue drops into a groove on the nut. Lubricating the sleeve and aligning the bearing are steps that come first.
BGL MS lock washers interchange with other brands that use the same designation, provided the sleeve diameter and HM nut type are the same. When you request a quote, give us the MS code or the HM nut number and we will identify the equivalent. MR Industrial Accessories is an official distributor of BGL in the USA.
If you need a lock washer for an HM nut on a large sleeve, send the MS code or nut model through WhatsApp or email. We will quote the exact reference and help you confirm it fits your application.
Dimensions
- Weight
- 0.055 kg
Frequently asked questions
- How do I choose the correct MS lock washer for my sleeve?
- Find the HM nut on the sleeve, then look up the MS code that matches it. If you are unsure, send the nut number or bearing code via WhatsApp and we will identify the exact reference.
- Does the MS lock washer work for any sleeve?
- No. Each MS code covers a specific range of HM nuts for large sleeves. The sleeve diameter and nut type must match. Send us your sleeve code and we will quote the right washer.
- What is the function of the lock washer screw?
- The screw fastens the washer to the HM nut and stops it from turning loose. This positive lock maintains bearing tightening on the tapered sleeve, especially where vibration is present.