BGL HE/HS212 adapter sleeve

BGL HE/HS212 belongs to adapter sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HE/HS212 and any equivalents.

Mount tapered bore bearings on plain shafts with the BGL HE/HS adapter sleeve. This assembly eliminates the need for a shaft shoulder or special machining. Each sleeve comes as a set with the sleeve itself, a lock nut, and either a lock washer or MS lock, so you get secure axial fastening right out of the box. The nut also lets you fine-tune the bearing's internal clearance during installation.

The HE/HS code tells you both the shaft size and the bearing series. For example, HE/HS204, HE/HS207, and HE/HS212 fit 2xx-series bearings with 20 mm, 35 mm, and 60 mm bores. HE/HS304, HE/HS307, and HE/HS312 cover 3xx-series bearings with the same bore sizes. The HE/HS2304 and HE/HS2307 series is for tapered bore bearings with specific dimensions. To pick the right sleeve, you need the shaft diameter and the bearing code.

These sleeves are common in food processing, chemical, cement, and metallurgical plants. You will find them on conveyors, pumps, fans, mixers, and other power transmission equipment. They work well when there is no shoulder on the shaft or when you need to adjust the bearing's axial position. They suit moderate loads and medium speeds, as long as the shaft tolerances are correct.

When selecting a sleeve, check the shaft diameter (maximum tolerance h10), the tapered bore bearing type, and the operating conditions. During mounting, clean all surfaces, apply the recommended lubricant, and tighten the nut with the proper tool until you reach the desired clearance. Proper alignment between shaft and housing is critical to avoid extra stresses and to help the assembly last.

BGL HE/HS adapter sleeves work with tapered bore bearings from other brands that use the same fastening system. If you have a code from another manufacturer or an unidentified part, send it to us and we can quote an equivalent. Interchangeability depends on shaft and bearing dimensions, so verify the complete designation. Share the bearing code or shaft dimensions and we will identify the exact reference.

MR Industrial Accessories LLC supplies BGL HE/HS adapter sleeves to customers across the United States and in several Latin American countries. To request a quote, send the part number or shaft dimensions via WhatsApp or email. Our team responds promptly and can help you choose the right sleeve and advise on mounting.