BGL AOHX3288GG hydraulic sleeve

BGL AOHX3288GG belongs to hydraulic sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AOHX3288GG and any equivalents.

For shafts where an interference fit makes assembly difficult, the BGL AOHX GG hydraulic sleeve provides a controlled way to install and remove bearings and similar components. Oil is fed through internal passages in the sleeve, cutting friction between mating surfaces so the fit can be worked without forcing parts. It suits medium and large shaft sizes, where mounting calls for a safer, repeatable method.

Reading the reference helps you find the right size. In AOHX30/500GG, AOHX31/500GG and AOHX32/600GG, the two digits after AOHX point to the bearing series, and the figure following the slash gives the bore in millimeters. Codes such as AOHX3088GG, AOHX3092GG and AOHX3096GG cover larger shaft diameters. The GG suffix marks the version with oil channels.

Plants that run rotating equipment rely on these sleeves when bearings must be fitted and pulled repeatedly. Cement, mining, steel, paper and power generation operations use them on large shafts, as do gearboxes, mills, crushers and other heavy machines. AOHX GG sleeves are also chosen when you need the correct shaft and bearing dimensions, the right fit and a lubrication plan that keeps the injected oil compatible with the system and its seals.

During mounting, check alignment and follow the recommended procedure. The sleeve seals and hydraulic connections must hold pressure reliably. Clean passages and filtered oil help the component last and allow damage-free dismounting. If you have a part number from another maker, compare bore, width, connection thread and channel position to find a match; we can identify the equivalent reference or quote the one you need.