BGL AH3284GG withdrawal sleeve
- Brand
- BGL
- Category
- Bushings and sleeves
- Subcategory
- Withdrawal sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
BGL AH3284GG belongs to withdrawal sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AH3284GG and any equivalents.
The BGL AH GG withdrawal sleeve is designed to secure tapered bore bearings onto shouldered shafts. It fits into the bearing bore and is held in place by a lock nut on the shaft or an end cap. The threaded design allows disassembly without harming the bearing. It is made of BGL nodular cast iron, with a carbon steel version available.
The AH GG series spans a broad size range, from AH32/530GG to AH39/670GG. In the part number, the digits following the slash specify the shaft diameter. AH denotes the withdrawal sleeve family, and GG indicates a construction variant. When selecting a sleeve, confirm both the shaft diameter and the bearing's tapered bore.
These sleeves are found in many industrial settings where tapered bore bearings are mounted on shouldered shafts. They are typical in power transmission equipment such as gearboxes, pumps, fans, and conveyors. Their design simplifies mounting and dismounting, which shortens maintenance downtime and helps extend bearing service life.
Selection depends on shaft diameter, bearing type, and operating conditions. Mounting involves pressing the sleeve into the bearing's tapered bore using a lock nut threaded on the shaft or an end cap. Proper alignment and the recommended mounting force are critical to prevent damage. Lubrication of both sleeve and bearing also impacts assembly performance and durability.
BGL withdrawal sleeves can replace equivalent products from other brands if dimensions and thread type are the same. When seeking a replacement, compare technical specifications to ensure compatibility with the existing bearing and shaft. MR Industrial Accessories can help you choose the right alternative if you provide the part number or dimensions of the original part.
To request a quote for the BGL withdrawal sleeve you need, send the part number or the shaft and bearing dimensions via WhatsApp or email. MR Industrial Accessories responds promptly and helps you find the solution for your equipment. We can also advise on the lock nut, lock washer, and withdrawal nut, which are ordered separately.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the purpose of a withdrawal sleeve?
- It mounts tapered bore bearings on shouldered shafts. The sleeve goes into the bearing bore and is secured with a nut or end cap. Its thread enables disassembly without damaging the bearing, simplifying maintenance.
- How do I select the correct BGL sleeve?
- You need the shaft diameter and the bearing type. The designation includes the bearing bore; for example, AH32/530GG fits a bearing with a 530 mm bore (the shaft is smaller). If unsure, contact us with your equipment details.
- Can BGL sleeves be used with bearings from other brands?
- Yes, they are interchangeable with equivalent sleeves from other brands if dimensions and thread match. To confirm compatibility, compare technical specifications or contact us with the original part number.