EMMAR 16-C1 roller chain
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Roller chains
- Series
- BS
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR 16-C1 belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16-C1 and any equivalents.
The 16-C1 is a single-strand roller chain from the European BS series with a 1-inch pitch. It transmits power between parallel shafts in equipment where the pitch and roller dimensions follow that standard. At MR Industrial Accessories, you can request a quote on WhatsApp using code 16-C1, and we will provide the BS series alternatives.
The designation 16-C1 identifies a single-strand roller chain: the number 16 corresponds to the 1-inch pitch, and the suffix C1 indicates one strand. The roller diameter is 15.88 mm and the inner width is 17.02 mm. Use these values to select a compatible sprocket and confirm that the chain fits the sprocket width.
You will find 16-C1 chains in agricultural machinery drives, conveyors, mixers, elevators, and process equipment that use a 1-inch pitch. They also appear in low- and medium-speed drives with single transmission ratios, where roller strength and ease of replacement are important. If the original equipment uses the BS standard, this chain is the usual replacement reference.
During installation, check that the sprockets have a 1-inch pitch and that the 17.02 mm inner width matches the sprocket groove. Verify shaft alignment, tension, and the condition of the teeth before fitting the new chain. For drives with pulsating loads or heavy contamination, review lubrication and inspection intervals. Do not mix links from different standards or with different wear levels.
To quote an equivalent, send code 16-C1 along with a photo of the old chain and the number of links. It also helps to include the pitch, roller diameter, and inner width measured with a caliper. With this information, we search the BS series for the option that best fits your equipment.
MR Industrial Accessories supplies power transmission components. To move forward with a quote for the 16-C1 chain or any other BS series reference, write to us on WhatsApp and send the code. We will reply with the alternatives and technical data you need to make a purchasing decision.
Dimensions
- Standard
- BS / ISO 606
- Rows
- Single
- Roller Ø
- 15.88mm
- Inner width
- 17.02mm
Frequently asked questions
- What are the dimensions of the 16-C1 chain?
- The roller diameter is 15.88 mm and the inner width is 17.02 mm. The pitch is 1 inch because the 16 designation in the BS standard indicates that pitch. For any other dimensions, confirm them with the manufacturer before ordering.
- How do I request a chain equivalent to the 16-C1?
- Send code 16-C1 on WhatsApp along with a photo of the chain and the number of links. If possible, include the pitch, roller diameter, and inner width measured with a caliper. We will then search the BS series for the option that fits your equipment.
- Can it replace a chain of another standard?
- Mixing standards is not advisable. The 16-C1 is a European BS standard chain, and its roller and inner width dimensions are standardized for that series. If the original equipment uses another standard, send us the data and we will evaluate the correct alternative before quoting.