Bearing 22213, dimensions 65 x 120 x 31 mm: SKF, FAG, NTN, NSK, LINK-BELT, RKB, and TIMKEN part numbers

There are 5 bearing types with this size: spherical roller bearings (28 part numbers, series 222), cylindrical roller bearings (19 part numbers, series NJ 22, NU 22, and NUP 22), self-aligning ball bearings (15 part numbers, series 22), SKF CARB toroidal roller bearings (4 part numbers, series C 22), and double row deep groove ball bearings (1 part numbers, series 42). Each type has its own table: they share the same size, but they do not work the same way and are not interchangeable.

4 of the 67 part numbers are the basic designation alone, without a suffix. The most frequent suffixes, with the number of part numbers they appear in: C3 (11), E (11), ECP (6), K (6), and XL (5).

These are boundary dimensions according to ISO 15, in millimetres: d is the bore, D the outside diameter and B the width.

Two bearings with the same size are not necessarily the same bearing: the type, the seals or shields, the internal clearance, the cage and the load rating depend on the designation, the suffix and the brand. That is why we quote by part number: send us the full part number shown on the bearing, the box or the drawing, or the size together with the variant you need.

If the part number can no longer be read, measure the bore, the outside diameter and the width, and look the size up in the bearings-by-size index: each size has its own page with all its part numbers.